How to improve the Nitro MT2? The Nitro MT2 G3.0!
New G3.0 Engine
The Nitro MT2 line-up is strengthened once again with the addition of the hugely powerful and exciting G3.0 engine! Already setting things alight in the Firestorm 10T chassis, the G3.0 is the powerplant of choice for the new generation of RTR Nitro MT2 trucks! The G3.0 gets the Nitro MT2 up to 45mph! Now that's FAST!
With a 100cc fuel tank you'll get extended fun time as well - no one will argue about that! The new aluminium tuned pipe gives you massive acceleration and top speed, plus the new high-flow air filter will extend engine life by keeping out more dust and dirt!
Long suspension arms and shocks
on both front (above) and rear (below).
More upgrades extend to the chassis and suspension as well. With redesigned front suspension parts for better strength, heavy-duty clutch bell, new diff gear material for more load-handling capability and gearing optimized just for the G3.0 engine, you will always have a smile on your face with the RTR Nitro MT2 G3.0!
We've improved the looks of our famous line of nitro stadium trucks as well! With the all-new Dirt Force bodyshell available pre-painted in two colours, chromed 6-spoke off-road racing wheels, and stealthy grey anodised chassis, it's practically an all-new track-devouring beast!
Add all of these new features and great upgrades to everything that's already great about the Nitro MT2 chassis and you get a fantastic off-road racing and bashing truck! Extra-long suspension arms cushioned with long-stroke oil-filled shocks, practically maintenance-free shaft 4WD system, and easy engine pullstarter combine for a great driving experience. Also standard is the removable, sealed radio tray that lets you quickly clean and work on the truck! Finally, add in the fact that the RTR Nitro MT2 G3.0 is factory pre-assembled and painted right out of the box, and you'll be in RC heaven!
On the power front the MT2 G3.0 features the new HPI Nitro Star G3.0 engine. This new high output engine features a racing standard SG shaft for better power transfer to the transmission. An aluminium crankcase with cooling fins and large heatsink head provide optimal cooling for long engine life and consistent performance. An aluminium tuned pipe and one-piece manifold give maximum torque and raw stump-pulling power!
A reliable, easy pull starter and a dual stage foam filter round out the engine package to make it the ultimate power source.
| || || || |
Factory-assembled chassis, fully pre-built and ready to go!
2.5mm thick cool anodised aluminium chassis
Strong G3.0 engine with dual stage foam air filter and tall heatsink head
Long-stroke oil-filled shock absorbers tame the roughest terrain
| || || || |
Removable radio tray for easy maintenance and cleaning
Strong shaft driven 4WD system is tough and durable
Large capacity fuel tank with primer for long run times
Fibreglass disk brake provides strong deceleration and good durability
| || || || |
Pre-glued Yokohama Geolander tyres for maximum grip
Cool chrome 6-spoke off-road wheels for great looks
Pullstarter makes it easy to get going fast
Sealed receiver box protects electronics from mud and fuel
| || || || |
Dual-chamber aluminium tuned pipe gets more power from the engine
Extra-strong construction for reliable performance and maximum fun
Race-inspired suspension gives you the best handling
Almost maintenance free drivetrain for non-stop fun and excitement
The MT2 G3.0 is available in these two awesome colour schemes. Check your local store for availability of your favorite colour.
RTR - PERFORMANCE STRAIGHT FROM THE BOX
HPI makes it as easy as possible for beginners to get into Nitro RC cars. The Nitro MT2 G3.0 it is completely pre-built and ready to go right out of the box! Everything is assembled and tuned for you by professionals - diffs, slipper clutch, shocks and more are perfect before you even open the kit, you don't have to do a thing to get going fast!
HPI Ready-To-Run models bring you the same high performance and quality that you'd expect from a high end model car kit but with the added convenience of being factory pre-assembled to the highest standards - giving you a high performance RC car straight from the box!
HPI RTR cars are 98% factory assembled - they come Ready-To-Run and equipped with all the radio gear required. Just a few steps are needed to get your car up and running, such as adding the batteries to the transmitter and receiver and if you have a nitro powered car, running in the engine - which is now even easier with our comprehensive manual and HPI RC cars DVD which are both included in every box.
Full Assembly Instructions and HPI RC Cars DVD
As with all HPI cars and trucks, you get a full, in depth instruction manual with step by step instructions that allow you to easily disassemble and reassemble your monster truck for maintenance and easy servicing.
The information on the HPI RC Cars DVD provides a complete and detailed introduction to the fascinating world of RC model cars. This DVD will show you step by step how to start and run in a Nitro engine, and how to get the best performance from your HPI RC car.
The HPI RC Car DVD is your personal RC car expert in a box!
High Quality Radio Gear
A high quality "pistol grip" design universal radio set is included. The radio gear is fully compatible with all other popular RC car standards, so it's easily upgradeable or it can be used with other cars as well.
To run together with other cars, interchangeable crystals make switching frequencies a breeze!
10411 - Nitro MT2 G3.0 (RTR)
Comes with factory assembed chassis with pre-painted bodyshell (in either red or blue), radio gear and G3.0 engine
Also contains detailed instruction manual and HPI RC Cars DVD. Ready to bash straight from the box!