Pinion Gear 26 Tooth (0.6m) - 88026 at HPI Europe

PINION GEAR 26 TOOTH (0.6M)

# 88026

E10/Not compatible with 48 and 64 pitch spur gears

Optional tuning gear for the E10.

A lower tooth count on the pinion gear will give you more acceleration, while a higher tooth count will give you extra top speed. Have a selection of pinion gears available so you can tune the speed of your car as desired!

Note: not compatible with 48-pitch and 64-pitch spur gears.

A full selection of 0.6M pinion gears are available to tune the gearing of your E10 for any track type:
#88020 PINION GEAR 20 TOOTH (0.6M)
#88021 PINION GEAR 21 TOOTH (0.6M)
#88023 PINION GEAR 23 TOOTH (0.6M)
#88024 PINION GEAR 24 TOOTH (0.6M)
#88025 PINION GEAR 25 TOOTH (0.6M)
#88026 PINION GEAR 26 TOOTH (0.6M)
#88027 PINION GEAR 27 TOOTH (0.6M)
#88028 PINION GEAR 28 TOOTH (0.6M)
#88029 PINION GEAR 29 TOOTH (0.6M)
#88030 PINION GEAR 30 TOOTH (0.6M)
#88031 PINION GEAR 31 TOOTH (0.6M)
#88032 PINION GEAR 32 TOOTH (0.6M)
#88033 PINION GEAR 33 TOOTH (0.6M)
#88034 PINION GEAR 34 TOOTH (0.6M)
#88035 PINION GEAR 35 TOOTH (0.6M)

This part fits the following kits/parts

Fits:	Standard Part	Option Part	Accessory
RTR E10 with Porsche 911 Turbo (Painted/200mm/CE-3pin)
RTR E10 DRIFT with Mazda RX-7 FD3S 190mm (Painted/190mm/CE- 2pin)
RTR E10 with Lamborghini Murcielago (Painted/200mm/CE- 2pin)
RTR E10 with Ford Mustang GT-R (Painted/200mm/CE-2pin)
RTR E10 DRIFT with Mazda RX-7 FD3S 190mm (Painted/190mm/CE- 3pin)
RTR E10 DRIFT with Toyota Sprinter Trueno AE86 (Painted/190mm/CE- 3pin)
RTR E10 with NISSAN SKYLINE R32 GT-R (Painted/200mm/CE- 3pin)
RTR E10 with Ford Mustang GT-R (Painted/200mm/CE-3pin)
RTR E10 WITH FORD GT BODY (200mm/EU 2PIN)
E10 DRIFT RTR WITH NISSAN S-13/DISCOUNT TIRE BODY